Crane hook
Weihua crane, crane hook(all kinds of bridge cranes, gantry cranes and electric hoist can be used)
1. Lifting hook group (general lifting hook can be divided into forging single hook, forging double hook and laminated double hook)
(1). Hook design, manufacturing implementation of GB/T 10051-1988 standard.
(2). Lifting hook is forged by DG20 (or according to user requirements)
(3). Hook are equipped with hook mouth latch, in case of lifting weight due to accident and decoupling.
Pulley diameter and wire rope diameter ratio is greater than 20, to ensure the service life of wire rope.
Pulley is equipped with a protective cover or prevent wire rope from jumping out of the wheel groove device.
E-Mail：craneweihua@126.com
- Description
- Specification
Weihua crane, crane hook(all kinds of bridge cranes, gantry cranes and electric hoist can be used)
1. Lifting hook group (general lifting hook can be divided into forging single hook, forging double hook and laminated double hook)
(1). Hook design, manufacturing implementation of GB/T 10051-1988 standard.
(2). Lifting hook is forged by DG20 (or according to user requirements)
(3). Hook are equipped with hook mouth latch, in case of lifting weight due to accident and decoupling.
Pulley diameter and wire rope diameter ratio is greater than 20, to ensure the service life of wire rope.
Pulley is equipped with a protective cover or prevent wire rope from jumping out of the wheel groove device.
All kinds of European crane hooks:
Weihua crane all kinds of European standard cranes, European standard electric hoist, European standard crane equipment and other lifting hooks:
3.1.1 GB/T 10051-1988 standard shall be implemented for the design and manufacture of lifting hooks.
3.1.2 the main and auxiliary hooks are single forged hooks, which are forged by DG20.Can be 360 ° rotation.
3.1.3 all hooks are equipped with hook mouth latches to prevent lifting weight from being unhooked due to accidents.
3.1.4 the ratio between pulley diameter and wire rope diameter is greater than 20 to ensure the service life of wire rope.
3.1.5 the design and manufacture of the pulley of the hoisting pulley block conform to the relevant provisions of zbj80006.10-97.
3.1.6 the ratio of the total pulley diameter to the wire rope diameter shall not be less than the standard value.
3.1.7 all the pulleys are provided with protective covers and rolled pulleys.
3.1.8 the surface of pulley rope groove is smooth to ensure no damage to the wire rope.
All kinds of hooks, such as explosion-proof hooks, insulated hooks and so on can be produced, welcome to inquire and purchase orders, thank you
Weihua crane, crane hook(all kinds of bridge cranes, gantry cranes and electric hoist can be used)
1. Lifting hook group (general lifting hook can be divided into forging single hook, forging double hook and laminated double hook)
(1). Hook design, manufacturing implementation of GB/T 10051-1988 standard.
(2). Lifting hook is forged by DG20 (or according to user requirements)
(3). Hook are equipped with hook mouth latch, in case of lifting weight due to accident and decoupling.
Pulley diameter and wire rope diameter ratio is greater than 20, to ensure the service life of wire rope.
Pulley is equipped with a protective cover or prevent wire rope from jumping out of the wheel groove device.
All kinds of European crane hooks:
Weihua crane all kinds of European standard cranes, European standard electric hoist, European standard crane equipment and other lifting hooks:
3.1.1 GB/T 10051-1988 standard shall be implemented for the design and manufacture of lifting hooks.
3.1.2 the main and auxiliary hooks are single forged hooks, which are forged by DG20.Can be 360 ° rotation.
3.1.3 all hooks are equipped with hook mouth latches to prevent lifting weight from being unhooked due to accidents.
3.1.4 the ratio between pulley diameter and wire rope diameter is greater than 20 to ensure the service life of wire rope.
3.1.5 the design and manufacture of the pulley of the hoisting pulley block conform to the relevant provisions of zbj80006.10-97.
3.1.6 the ratio of the total pulley diameter to the wire rope diameter shall not be less than the standard value.
3.1.7 all the pulleys are provided with protective covers and rolled pulleys.
3.1.8 the surface of pulley rope groove is smooth to ensure no damage to the wire rope.
All kinds of hooks, such as explosion-proof hooks, insulated hooks and so on can be produced, welcome to inquire and purchase orders, thank you
